Mole Trapping Made Easy – How to Set a Mole Trap
Moles are furry and tiny animals that live below the ground. Every time they dig underground, they make patches above the ground. If you do not control this kind of activity, your entire landscape will have a dirty and chaotic appearance.
Moles have this habit of digging because they are constantly searching for earthworms and grub. As they burrow, the dirt and grass are pushed up, creating those ugly rounded mass on the surface. If you see a lot of mounds on your lawn, most likely, there is a high presence of moles there.
One of the most successful methods for this problem it to use a trap. Do not forget to wear gloves as you are setting up the trap. These creatures can easily distinguish the smell of human beings once you touch the thing just using your bare hands.
The moles somehow know that the traps are touched by a human. Hence, they tend to avoid them. To be able to find an active mole, stomp on top of the mounds. If they are pushed up again on the following day, then you have found your molehills. You really need to set your mole traps in those active areas.
Setting an Effective Trap
- Look for Tunnels
To do this, you need to locate the molehills first. You can identify them through the mounds of dirt all over your lawn. The molehill will lead you to the tunnels. A tunnel is softer to touch, so feel the areas of the grass that extend far from the molehill. Moles normally burrow their tunnels on fences or other structures. For that reason, inspect your property for such structures to locate the tunnels.
- Find Out if You Have an Active Tunnel
Step over the tunnel to make a cave in it. The dirt will likely be covering the direction of the tunnel. For about a day, leave the flattened tunnel, and see if it has been pushed upward again. If yes, you now have a tunnel to deal with.
- Uncover an Area of a Tunnel
For this step, a gardening tool can help you to dig out a part of the tunnel. Before using your trap in the uncovered area, the dirt should be at the bottom level of the tunnel so that the mole cannot burrow below your trap. You need to cover the tunnel loosely, in order for the mole to still dig in the dirt. You can easily catch the mole through your trap.
- Set Your Trap
There are several types of methods in catching moles. These traps differ in how they seize the mole, but practically all of them are effective.
- Cover the Trap
Use a big bucket when you cover your mole trap. This is to prevent kids and domestic pets from going to the spot. Using a bucket also obstructs any light to enter, allowing the mole to keep on burrowing.
- Take out the Trap
Inspect the mole trap on a regular basis to find out if you have captured a mole. Once the trap has been activated and you got one, take out the trap along with the animal. In case you have not captured even one of these creatures after a couple of days, move the trap to another spot.
The Different Kinds of Mole Traps
Harpoon Trap. Once triggered, this kind of trap spears the animal with its spike. Some people call this method a spear trap or plunger trap. A trap like this uses a trigger pan that is placed in the soil. If a mole shows up, the force upward sets off the trigger pan, which lowers down a sharp spike towards the mole. When used incorrectly, the harpoon trap may stick out over the ground. This can cause harm to other people.
In setting a harpoon trap, put and secure the trap above the tunnel runway with its legs pressed down into the bottom of the sides of the tunnel. Carefully press the legs further down, and place the trigger pan slightly over the soil. After that, pull the setting tee upward.
Choker Trap. This type of trap is also called as loop trap. Its main function is to encircle the neck of the mole to capture it. In contrast to other traps, the choker trap does not use some baiting. Some people find it difficult to set this particular trap. So, you only need to set it properly, wait for a mole to walk inside the choker trap, and then strangle it.
To set up this trap, work with a garden tool to burrow an opening in the tunnel. Make a deeper opening than the original depth of the tunnel, although the width should be similar as the tunnel. Position the loop inside the tunnel in order for it to follow the same path. Put some soil in the open section of the trap, so the mole will keep on burrowing through the tunnel and get trapped inside.
Scissor Trap. When this trap is triggered, its arms will close around the mole. Setting a up scissor trap is not complicated. You do not need to use any harsh chemicals or hazardous gas in your lawn. In this case, there are no expensive pest-control expenses.
This type of trap is positioned below the ground mainly so that they cannot harm people and other animals. As a mole is trying to dig a hole, it is putting an upward force and make contact with the trap mechanism.
To set this trap, put some dirt on the jaws loosely in the center of the tunnel. Make sure the spot between the jaws is open and free from dirt. The jaws should cover all over the runway of the tunnel. Next, press it down into the ground. Set the trapping mechanism based on the instructions in the manual when buying this trap.
The important thing is you carry on the job and keep track of the situation. This is when a new group of moles comes their way onto your property, you know to control the problem. All things considered, you may ask the assistance of an expert mole catcher to perform the task and manage the situation.